(1) the weaving machine has not been arranged or suspen […]
(1) the weaving machine has not been arranged or suspended in time.
(2) there is no leveling before the predetermined type, and it is predefined under the condition of the crease.
(3) no cooling or cooling rate is too fast after dyeing.
(4) there is no cooling after drying, and the extrusion time is too long in the hot state, and it is not finished in time.
(1) the weaving machine and the prearranged type must be leveled.
(2) when the dyeing is completed, the temperature is below 60 degrees centigrade at the speed of 2 /min.
(3) after drying, cool down to below 40 centigrade and get out of the box in time.
(4) add the softener in the bath when the dye is dyed.
(5) to operate strictly according to the requirements of the process.