What are the detailed requirements for computerized flat knitting machine accessories?

Update:17 Sep 2020
Summary:

Detailed requirements for computerized flat knitting ma […]

Detailed requirements for computerized flat knitting machine accessories:
1. Frame: There are two hills, and the hills are connected into a whole by two beams, it is a casting. The small parts installed on the rack include a wrench, a wrench fixing screw, a needle plate screw, and a needle plate screw compression spring.
2. Needle plate: It is made of steel plate with considerable hardness. The parts on it are large bead, small bead, machine needle, tofu block and fixed screw.
3. Guide rail: The guide rail is made of parts or special steel. It is fastened to the frame with fixing screws. The computer flat knitting machine accessories are generally divided into two front and rear parts, which are the track for the head of the machine. There is one above the rear guide rail. A yarn feeder guide rail is mainly used when feeding the yarn feeder to move steadily from side to side or to change the yarn feeder.
4. Faucet: It is the heart of the flat knitting machine. The computer flat knitting accessories of the entire machine head are installed on it. Its parts include front and rear faders, pusher scorched wooden balls and screws, pusher platen (also called pusher slider), and slider Bearings are mounted on it. The front part of the faucet is equipped with a three-eye cover. The screw that passes through the three-eye is a trigger triangle rod. The screw in the center eye is called a live heart rod screw, a tie rod well circle and a needle pilot triangle wrench, a live heart wrench, and the head The one with scale on the surface is called the scale plate, the scale plate is equipped with a small pressure plate, and the screw in the center of the scale plate is called a double screw. The lower end of the two-end screw is fastened to the big triangle, the center of the two-end screw is equipped with a pointer, and the ingot screw is installed on the pointer. A shuttle rack is installed behind the faucet, and the shuttle rack is equipped with a swing rod and a shuttle rod. The back of the machine head is also equipped with a latch switch. The main part on the machine head is the flower plate.
5. Flower board: The flower board is the center of the flat knitting machine. It has a bottom plate seat. All the triangles are installed on the bottom plate seat. The triangles on the flower plate include the needle triangle, the heart triangle (live chicken heart, small chicken heart), and herringbone. Triangle, big triangle.